Christmas Cheer

WOW! I’s been and still is a busy time, but I did manage to get a Christmas project finished. A small wall hanging (18″ x 23″), stitched on my Bernina 780 using different techniques.Christmas Cheer C

The Christmas branches were sewn with Razzle Dazzle, a heavier than normal thread that had to be wound on the bobbin and therefore stitched from the back. Once that was done I turned it around and free motion  stippled the background from the front. The poinsettia petals and leaves were sewn separately and assembled into flowers and then  later attached to the background to give a 3-D effect. The gold curls are regular embroidery files and stitched directly on the background. The holly leaves were embroidered as free standing applique that were attached by stitching a very narrow satin stich over the center vein so they sort of float over the background as well.

A pattern with full instructions, templates, embroidery files and tips on placement  is available on my website at http://www.quiltersniche.com/Embr-Appliq-SVG/New-Embroidery.htm. It does require you to make some decisions on the exact placement of all the elements, but it should not be hard as you have the stitched Christmas branches as a guide. It does not require a large hoop as the branches are stitched on a regular sewing machine, but as they are sewn with a heavier thread you may have to lower the tension on your bobbin a bit or get a second bobbin you use only for bobbin work.

Merry Christmas,

Georgette.

Advertisements